Turn on the button, the working interface (if iron tip no insert in the handle, the display shows "ERROR", and if iron tip insert in the handle, the display show the current temperature normally)

　　Note: when the new iron tip is inserted, the temperature of the display will jump, and there will always report an ERROR (display ERROR). It will be normal after a period of time!

　　Temperature control range of soldering station: 200-480c,normal working temperature: 300-380c

　　In order to protect the working life of the soldering iron tip, it is recommended that the temperature do not more than 380C!

　　General function menu of OLED soldering station:

　　Enter the menu Settings interface: under normal working temperature interface, long press the encoder button (about 3s), enter the host setting mode!

　　Exit menu Settings interface: under the menu setting interface, long press the encoder button (about 3s), exit the host setting mode!

　　Settings menu:

　　Enter the function item: rotate the encoder to the corresponding function, and short press the button to enter the function item.

　　Exit setting function item: after setting the corresponding parameters with the encoder rotary knob, short press the button to confirm exit the function item

　　1. Temperature calibration

　　After selecting the temperature calibration function, press the encoder to enter the temperature calibration setting, the adjustable temperature ratio: 70%-130%

　　2. Auto sleep

　　Chooseing auto sleep, short press encoder, into the auto sleep setting, the time setting range: 0-99 minutes, if you don't need the auto sleep, the dormancy feature can be set to OFF.

　　Default auto sleep for 1 minute, means after 1 minute the host and handle is stand still, the soldering station will entry to dormant state, the temperature of soldering iron tip will drop to 200C, at this time when move handle or rotary encoder, The soldering station will rapidly heat up the working temperature before hibernation.

　　You can set the auto sleep according as the usage scenario and working habit, it can be extended the working life of the soldering iron tip and protect your family and friends safe!

　　3. Auto Poweroff

　　Chooseing poweroff time feature, short press encoder, into the poweroff time setting, the time setting range: 0-99 minutes, if you don't need the poweroff time function, the poweroff function can be set to OFF.

　　Default poweroff time for 1 minute, means after 1 minute the host and handle is stand still, the soldering station will entry to poweroff time state, the temperature of soldering iron tip will drop to 60C, at this time when move handle or rotary encoder, The soldering station will rapidly heat up the working temperature before hibernation.

　　You can set the poweroff time according as the usage scenario and working habit, it can be extended the working life of the soldering iron tip and protect your family and friends safe!

　　4. Boost duration

　　After choosing boost duration, short press the encoder and enter the time setting. The time setting range: 0-99 minutes.

　　The default time is 30 seconds, it can be set according as the actual needs, after setting, short press the encoder to confirm and exit. When working normally, it takes a short time to increase temperature welding

　　the larger welding spot, it can be heated to the set temperature rapidly after pressing the encoder. After 30 seconds, the host will automatically return to original temperature. This can avoid soldering iron tip oxidation when with high temperature to use!

　　5. Boost degree

　　After chooseing boost degree, short press the encoder, enter boost degree setting, the temperature setting range: 10-80 ℃.

　　The default boost degree is 30 ℃, it can be set according as actual needs, after setting, short press the encoder to confirm and exit. When working normally, it takes a short time to increase temperature welding

　　the larger soldering spot, it can be heated to the set temperature rapidly after pressing the encoder. After 30 seconds, the host will automatically return to original temperature. ThThis can avoid soldering iron tip oxidation when with high temperature to use!

　　6. Wakeup method

　　After selecting the wakeup method, short press the encoder, enter setting of wakeup method, the system provides two kinds of wakeup method: encoder together with handle or just encoder.

　　When choosing encoder + handle, the soldering station is automatic power off, shaking handle or short press encoder, all can wakeup the host!

　　When choosing the encoder, the automatic shutdown state, short press or rotary encoder can wakeup the host, but shaking handle cannot wakeup the host!

　　The default setting is: encoder + handle, which can be set according to actual needs.

　　7. Buzzer switch

　　This version OLED controller integrates with a buzzer, and the sound prompts the host state. The buzzer will beep when the host encounters an error or sets the appropriate function.

　　8. Battery guard

　　According to the voltage environment of the host, built-in battery guard function of this soldering station, and the default voltage is 12V. When the voltage is not stable, the power supply will be supercharged according to the setting. Usually don't need to set it.

　　9. Firmware

　　This controller firmware!

　　10. Factory reset

　　Restore the parameters of the soldering station to the factory reset. Note: please back-up your usual important parameters before you restore factory Settings to prevent data loss. For example: temperature calibration value, strengthening time and temperature, etc.

　　About soldering iron tip:

　　1. The new soldering iron tip may have a constant temperature jump in the use of it, and it has not been wrongly reported. Please rest assured that this is due to the temperature of the internal temperature measuring thermocouple in the soldering iron tip, which is normal situation, the temperature will gradually stabilize after a period of time.

　　2. The working temperature of the soldering iron tip is about 300C to 380C, and the working temperature should not exceed 450C in a short time. Otherwise it will affect the working life of the soldering iron tip!

　　3. Different welding scenes should be selected with different soldering iron tip. Large welding spot or aluminum base plates will need to be touched to large soldering iron tip (such as C4). Small welding spot can be used

　　C1, JL02, ILS, etc.

　　Notes:

　　1. In order to prevent the iron tip is not tin with high-temperature oxidation. Once the new soldering iron tip is used for the first time, please put the tin to the iron tip head to protect it when heating.

　　2. The new soldering iron tip is used for the first time, the heat up may be slightly slower, and it can melt tin 7 seconds after the normal use of 1-3 hours.

　　3. 7 seconds of tin, only for solder wire with the high purity and low melting point, the higher the lead tolerance, the speed of melt tin is slower, the higher the temperature will be required. Wo we suggest to choose the high purity with low melting point solder wire from my store.

　　4. After you receive the product, if the controller display is tilted to one side, please rest assured that it is caused by the collision occurred during the transportation. Please open the cover and press the screen to the normal position, do not tighten or loosen the encoder nut, just please press it.